changing tools

Discuss topics related to the 3D Router & the X-Motion Portable Mortiser
Post Reply
jllmechengr
Posts: 1
Joined: Mon Mar 25, 2019 1:41 pm

changing tools

Post by jllmechengr » Mon Mar 25, 2019 4:33 pm

I'd prefer to permanently mount a tool (or spare motor), but in the videos I see you changing between a drill and a router...is there a reason to change tools in the machine? I was thinking perhaps it was in order for using different rotational speeds for different tasks; however, somewhere on this forum I also ran across where someone was incorporating a (voltage?) regulator for that purpose...

Suso
Posts: 2228
Joined: Thu Oct 22, 2015 4:51 pm

Re: changing tools

Post by Suso » Tue Mar 26, 2019 7:41 am

hello,
as you say, I'm using a different tool for each task. For example, to work with the sanding drum you should use a drill.

Post Reply