Imperial Materials
-
- Posts: 1
- Joined: Mon Sep 07, 2020 6:23 pm
Imperial Materials
Is there an issue using 3/4" plywood and imperial fasteners instead of the metric ones in the plans? Wondering if there will be a 1mm error stack due to the thickness difference that will mess up the finished project.
-
- Posts: 2244
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Imperial Materials
hello,
I think you can do it, if you go slowly, checking each step, and rectifying the necessary parts.1mm is not too much difference.
I think you can do it, if you go slowly, checking each step, and rectifying the necessary parts.1mm is not too much difference.