3D Router, when a CNC machine is overkill.

Discuss topics related to the 3D Router
Suso
Posts: 1016
Joined: Thu Oct 22, 2015 4:51 pm

3D Router, when a CNC machine is overkill.

Post by Suso » Fri Aug 14, 2015 6:29 pm

This is my last project, plans and videos will be ready in a few days, thanks!

Image

More info on Blog

Desain
Posts: 1
Joined: Sat Aug 15, 2015 8:44 pm

3D Router, when a CNC machine is overkill.

Post by Desain » Sat Aug 15, 2015 6:46 pm

Amazing setup ... this is the most interesting router setup i've ever seen.

Makes me want to build one myself

Love your guitarwork also

Keep up the good work

Suso
Posts: 1016
Joined: Thu Oct 22, 2015 4:51 pm

3D Router, when a CNC machine is overkill.

Post by Suso » Sun Aug 16, 2015 2:22 pm

wrote:Amazing setup ... this is the most interesting router setup i've ever seen.

Makes me want to build one myself

Love your guitarwork also

Keep up the good work


thank you Desain.

Suso
Posts: 1016
Joined: Thu Oct 22, 2015 4:51 pm

3D Router, when a CNC machine is overkill.

Post by Suso » Mon Aug 24, 2015 7:31 pm


Suso
Posts: 1016
Joined: Thu Oct 22, 2015 4:51 pm

3D Router, when a CNC machine is overkill.

Post by Suso » Tue Aug 25, 2015 6:54 pm


Pete
Posts: 5
Joined: Fri Sep 04, 2015 9:26 pm

3D Router, when a CNC machine is overkill.

Post by Pete » Fri Sep 04, 2015 7:29 pm

I love this 3D router table!

Can I make this project with metric drill bits and Imperial router bits? It looks like the grooves you cut with the router can accept a little wiggle.

Thanks!

Suso
Posts: 1016
Joined: Thu Oct 22, 2015 4:51 pm

3D Router, when a CNC machine is overkill.

Post by Suso » Fri Sep 04, 2015 7:57 pm

Hello Pete, you have no problem to use imperial router bits ... for these grooves do not need super precision.

charlottebiszewski
Posts: 1
Joined: Fri Oct 23, 2015 3:22 pm

3D Router, when a CNC machine is overkill.

Post by charlottebiszewski » Fri Oct 23, 2015 1:24 pm

Hi

Thinking of buying the plans, but before, could you let us know
The additional parts list
The amount of plywood, thickness, needed

Thanks

Pete
Posts: 5
Joined: Fri Sep 04, 2015 9:26 pm

3D Router, when a CNC machine is overkill.

Post by Pete » Fri Oct 23, 2015 1:41 pm

I used two 5 foot by 5 foot sheets of 18mm baltic birch plywood, plus some 6mm and 12mm scraps

Post Reply