Ask me about Homemade Router and Saw Table.
-
- Posts: 2244
- Joined: Thu Oct 22, 2015 4:51 pm
Ask me about Homemade Router and Saw Table.
Hello Eric, with a template can be done without problem! In a few days I will edit a video showing how to do it! I have not tried yet router the binding, but also has to work...
-
- Posts: 2
- Joined: Tue Sep 01, 2015 3:25 pm
Ask me about Homemade Router and Saw Table.
Thanks! I'd be interested to know. The biggest issue with the Les Paul Body binding is the curve in the inner bottom horn. To do that right, the router needs to float along the z axis along with the contour of the carve top. I wasn't sure if removing the spring on your design would accomplish the same thing.
-
- Posts: 2244
- Joined: Thu Oct 22, 2015 4:51 pm
Ask me about Homemade Router and Saw Table.
It's true, I've made some Les Paul, when I have more information I will share!
-
- Posts: 1
- Joined: Wed Sep 02, 2015 12:06 pm
Ask me about Homemade Router and Saw Table.
Hola,
Me quedé impresionado por su mesa de trabajo. Tengo la intención de adquirir el proyecto. Pero tengo algunas dudas!
1) Redimenssionar es posible, de manera que la bancada pasa a través de una puerta con 75 cm de ancho? Como una mesa con ruedas!
2) Quiero saber el modelo de la makita que se utiliza para ver si puedo comprar aquí en Brasil , o uno que se puede utilizar.
Saludos desde Brasil . Un fuerte abrazo y gracias por escuchar Saludos desde Brasil . Un fuerte abrazo y gracias por escuchar.
Leandro Sanches Fonseca
Me quedé impresionado por su mesa de trabajo. Tengo la intención de adquirir el proyecto. Pero tengo algunas dudas!
1) Redimenssionar es posible, de manera que la bancada pasa a través de una puerta con 75 cm de ancho? Como una mesa con ruedas!
2) Quiero saber el modelo de la makita que se utiliza para ver si puedo comprar aquí en Brasil , o uno que se puede utilizar.
Saludos desde Brasil . Un fuerte abrazo y gracias por escuchar Saludos desde Brasil . Un fuerte abrazo y gracias por escuchar.
Leandro Sanches Fonseca
-
- Posts: 2244
- Joined: Thu Oct 22, 2015 4:51 pm
Ask me about Homemade Router and Saw Table.
Hola compañero, puedes redimensionar los planos, pero vas a perder mesa de trabajo claro...como la tengo yo se desmonta fácilmente sacando unos pocos tornillos, por lo que si no la vas a mover habitualmente, igual te compensa dejarla tal cual y hacer eso.
La circular es una Makita 5603R
http://www.amazon.es/Makita-5603R-Sierra-circular-4-9/dp/B000NDB8NM
La circular es una Makita 5603R
http://www.amazon.es/Makita-5603R-Sierra-circular-4-9/dp/B000NDB8NM
-
- Posts: 3
- Joined: Fri Sep 11, 2015 8:00 am
Ask me about Homemade Router and Saw Table.
Hi. I'm building this table for my father and will also be making the router eventually. I'm not a woodworker so will have a few questions.
With the plans: what type of joins are you using for the internals and the surface? and what is the purpose of the small pieces of wood on the underside of the table? (# 3 in Cabinet-Exploded.jpeg)
Thanks
With the plans: what type of joins are you using for the internals and the surface? and what is the purpose of the small pieces of wood on the underside of the table? (# 3 in Cabinet-Exploded.jpeg)
Thanks
-
- Posts: 2244
- Joined: Thu Oct 22, 2015 4:51 pm
Ask me about Homemade Router and Saw Table.
Hello Spencer, these small parts are just to attach the top to the body, you can see on the 0.30 minute into this video:
https://www.youtube.com/watch?v=mb43vFDioVs
I recommend you see all the videos for better understanding.
For joints, I use screws(4x50) and dowels, but it works only with screws, I have not used tail, if I need to disassemble, but you can use, thanks!
https://www.youtube.com/watch?v=mb43vFDioVs
I recommend you see all the videos for better understanding.
For joints, I use screws(4x50) and dowels, but it works only with screws, I have not used tail, if I need to disassemble, but you can use, thanks!
-
- Posts: 3
- Joined: Fri Sep 11, 2015 8:00 am
Ask me about Homemade Router and Saw Table.
I cant seem to make a decision on the finish for the table top. I have a hardwood ply. i'd like a clear finish which is low friction and durable. unfortunately i do not have the funds to test several methods. id like to stain the ply a little darker and have some kind of glossy finish. im thinking of 2 coats of clear primer, sanded down then a gel stain, then either a poly or laquer finish. although finding compatible products is kind of difficult. the paint shops advice contradicts most of the material i'm finding online. what finish can you recommend?
-
- Posts: 1
- Joined: Wed Nov 11, 2015 5:07 pm
Ask me about Homemade Router and Saw Table.
Hello,
I just bought plans, and will start the table build soon with some modifications, such as adding a jointer using a hand jointer on the side, and sealing the router box to have a double suction from the fence and box.
Anyway, I'm curious as to whether you have any problems with kickback on the saw without the riving knife? I plan on using an old table saw with the top removed so I can have the up/down/angle controls, and I'm wondering if I should remove the riving knife.
Also, what did you use to square up your saw blade to your fence? I was wondering if I would need to add an adjustment to the fence in case it gets out of alignment with saw blade.
Thanks for your help.
Kevin
I just bought plans, and will start the table build soon with some modifications, such as adding a jointer using a hand jointer on the side, and sealing the router box to have a double suction from the fence and box.
Anyway, I'm curious as to whether you have any problems with kickback on the saw without the riving knife? I plan on using an old table saw with the top removed so I can have the up/down/angle controls, and I'm wondering if I should remove the riving knife.
Also, what did you use to square up your saw blade to your fence? I was wondering if I would need to add an adjustment to the fence in case it gets out of alignment with saw blade.
Thanks for your help.
Kevin