Ask me about Homemade Router and Saw Table.

Discuss topics related to the Router & Saw Table
Suso
Posts: 985
Joined: Thu Oct 22, 2015 4:51 pm

Ask me about Homemade Router and Saw Table.

Post by Suso » Mon Nov 16, 2015 2:26 pm

Hi Kevin,

I like the idea of jointer, in fact I already had that mod in mind.

About the riving knife, if I were you I woudn't remove it. It's always better to keep it safe if you can.

To square up the saw blade you better move the fence to the place where the blade goes and make a mark, then remove the fence and you got it. Anyway you'll be able to rectify it a little later play with the screws in both sides of the fence.

Paoson

LiquidFlame
Posts: 1
Joined: Tue Jan 19, 2016 8:48 pm

Ask me about Homemade Router and Saw Table.

Post by LiquidFlame » Tue Jan 19, 2016 7:54 pm

Do your plans included any kind of way to adjust the height of the circular saw blade?

Suso
Posts: 985
Joined: Thu Oct 22, 2015 4:51 pm

Ask me about Homemade Router and Saw Table.

Post by Suso » Wed Jan 20, 2016 8:36 am

Hello;
It is controlled by the circular saw system, check out to 1.15 minute of this video:

https://www.youtube.com/watch?v=mb43vFDioVs

FearTheBeard9713
Posts: 1
Joined: Tue Dec 22, 2015 1:56 am

Ask me about Homemade Router and Saw Table.

Post by FearTheBeard9713 » Thu Jan 21, 2016 3:08 pm

Hello,

Can you give the brand and model number for the circular saw and router you used? I would like to read the specs for them and see if I would like to use them in my build

Thank you


Txispax
Posts: 2
Joined: Mon Jul 13, 2015 8:05 pm

Ask me about Homemade Router and Saw Table.

Post by Txispax » Sun Jan 24, 2016 6:10 pm

Hola Suso.

Creo que se te ha dado la vuelta el 9.
El modelo de Makita es el 5903R no el 5603R

Suso
Posts: 985
Joined: Thu Oct 22, 2015 4:51 pm

Ask me about Homemade Router and Saw Table.

Post by Suso » Mon Jan 25, 2016 8:36 am

Tienes razón Txispax! con tanta referencia y tanto número a veces se me olvidan las cosas...ya lo he editado en el mensaje anterior...muchas gracias por la corrección.

Un saludo:
Suso

Leafs14
Posts: 1
Joined: Fri May 20, 2016 10:54 pm

Ask me about Homemade Router and Saw Table.

Post by Leafs14 » Sun May 29, 2016 6:06 pm

Hello,

I am very interesting to make by use your homemade router and saw table plan, i bought that plan! I still figuring out how to install circular saw once i complete the table? In the plan not really explain how to install circler saw. I bought new 7 1/4 circular saw from DeWalt.

Cant wait to start that project soon!

By the way, I am in canada so might be different than UK.

[email protected]
Posts: 43
Joined: Thu Oct 15, 2015 5:35 pm

Ask me about Homemade Router and Saw Table.

Post by [email protected] » Mon May 30, 2016 6:51 am

Hi,

you only have to adapt this milling to the dimensions of the base of your circular saw:
https://youtu.be/m4ulshvXxkE?t=442

then you only have to use a few bolts to hold the CS to the table. You may also have to make drill holes in the base of your Cs if you don't have any.

Azurik
Posts: 2
Joined: Tue Oct 25, 2016 12:28 pm

Ask me about Homemade Router and Saw Table.

Post by Azurik » Tue Oct 25, 2016 11:06 am

Hey,

I just found you Page today, I'm seoursly impressed!
I started working with wood this year, have a pretty good geared garage ( tools )

But this Saw Table would be a perfect tool for it.

I've some questions before.
- What would you think is the total cost of the material I need ? +/-
- are their special tools important to have ?
- Is it possible to do it for a beginner? I dont want to buy done stuff, even if I didnt planed this one by myself but somewhere
I built it by myself.


Greetings from Germany
Klaus

Post Reply