Hi Paoson,
I live in Australia and am unable to source the spindle motor you use in your design. I was wondering whether I could substitute it for a Trim Router or small plunge router.
Router for the router table
-
- Posts: 2
- Joined: Thu Oct 08, 2015 12:26 am
Router for the router table
Thankyou Paoson for your quick reply. I find your designs very practical and creative. Please post more pictures of your projects on your site.
Thank you again Mouse.
Thank you again Mouse.
-
- Posts: 26
- Joined: Mon Feb 01, 2016 8:31 am
Router for the router table
Hello,
I am really impressed with your work. Regarding the router I do have a little problem. I have a little buget problem and right now I start to build all the components from scratch. A router motor is about 700 euro here in Romania. I want to ask a simple question. I have a hand-router manufactured by Black and Decker . I don not want to destroy it for now. If I will adapt the suport for it do you think will be problems ? I`m worried for the angle cuts. The router is like this http://www.blackanddecker.co.uk/powertools/productdetails/catno/KW900EKA/ . Other issue is I need it also for other jobs till I will buy a good spindle.
Thanks a lot.
I am really impressed with your work. Regarding the router I do have a little problem. I have a little buget problem and right now I start to build all the components from scratch. A router motor is about 700 euro here in Romania. I want to ask a simple question. I have a hand-router manufactured by Black and Decker . I don not want to destroy it for now. If I will adapt the suport for it do you think will be problems ? I`m worried for the angle cuts. The router is like this http://www.blackanddecker.co.uk/powertools/productdetails/catno/KW900EKA/ . Other issue is I need it also for other jobs till I will buy a good spindle.
Thanks a lot.
-
- Posts: 2242
- Joined: Thu Oct 22, 2015 4:51 pm
Router for the router table
It will work if you adapt it but you may not be able to get angle cuts. If I where you I'd buy one like mine. I you don't find it at a reasonable price in Romania you could buy it online for 160€.
Good luck with your project and thanks for comment.
Good luck with your project and thanks for comment.
-
- Posts: 26
- Joined: Mon Feb 01, 2016 8:31 am
Router for the router table
Thanks a lot. I will by today your plans and I will see how I can adapt. Afterr few orders I can save the money forr a spindle. I already check your links in previous reply.
Best regards and success.
Best regards and success.
-
- Posts: 3
- Joined: Sun Jun 12, 2016 11:00 am
Router for the router table
Hi Paoson,
Great web site.
I have a brand new Trend T5 router Trend T5 router
Can this machine be successfully integrated into the table or would you recommend a router similar to your own? I would like to avoid further expense if possible.
Best regards
Simon
Great web site.
I have a brand new Trend T5 router Trend T5 router
Can this machine be successfully integrated into the table or would you recommend a router similar to your own? I would like to avoid further expense if possible.
Best regards
Simon
-
- Posts: 43
- Joined: Thu Oct 15, 2015 5:35 pm
Router for the router table
Hi RotingBaconAFC,
you can use that one making a simple modification of the plans. If you rather don't make any mods, you can try one of this:
Trend T4 Amazon.com
Trend T4 Amazon.uk
It is a good offer and it will fit in the table without modifications.
you can use that one making a simple modification of the plans. If you rather don't make any mods, you can try one of this:
Trend T4 Amazon.com
Trend T4 Amazon.uk
It is a good offer and it will fit in the table without modifications.