Piece 14 size is incorrect in the cutting list

Discuss topics related to the Router & Saw Table
Post Reply
Slava1
Posts: 3
Joined: Thu Aug 17, 2017 12:27 pm

Piece 14 size is incorrect in the cutting list

Post by Slava1 » Wed Aug 30, 2017 8:49 pm

Hello,

Piece 14 of the cabinet is given an incorrect size both in the Maxcut file and in the Cabinet.pdf file in the cutting list-despiece folder. It is listed as 532.5x30 while it is 532.5x50 both in Sketchup and in the PDF Plans Exploded.pdf file (page 10).

Kind regards,
Slava

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Piece 14 size is incorrect in the cutting list

Post by Suso » Thu Aug 31, 2017 10:53 am

hi Slava,
thank you for letting me know, I must change that measure. Sorry for the disturbances!

Slava1
Posts: 3
Joined: Thu Aug 17, 2017 12:27 pm

Piece 14 size is incorrect in the cutting list

Post by Slava1 » Mon Sep 04, 2017 4:05 pm

Hi,

Also please note that Piece 36 (horizontal router) appears only once in the cut-list pdf and in maxcut (should be twice).

Thanks

Suso
Posts: 2236
Joined: Thu Oct 22, 2015 4:51 pm

Piece 14 size is incorrect in the cutting list

Post by Suso » Mon Sep 04, 2017 5:59 pm

thanks Slava,
I just corrected it, you can re-download the plans on my website.

Post Reply