I recently built your router table but could not find out where I would get this one part for the long bolts depicted below. I'm looking for where I might find the spacer to help keep the knob up high.
Picture attached
Thanks again!
Spacer for Router Table bolts
-
TommyH27
- Posts: 5
- Joined: Sun Jan 31, 2021 6:52 pm
Spacer for Router Table bolts
Hi, first off, thanks so much for all your sharing, work and plans. Three years ago I downloaded and built your mobile work benches as my first large woodworking project. They came out great and are the heart of my workshop.
I recently built your router table but could not find out where I would get this one part for the long bolts depicted below. I'm looking for where I might find the spacer to help keep the knob up high.
Picture attached
Thanks again!
I recently built your router table but could not find out where I would get this one part for the long bolts depicted below. I'm looking for where I might find the spacer to help keep the knob up high.
Picture attached
Thanks again!
-
Suso
- Posts: 2242
- Joined: Thu Oct 22, 2015 4:51 pm
Re: Spacer for Router Table bolts
hi Tommy,
it's a simple steel pipe with an outer diameter of 10mm and an inner diameter of 8mm. It can be made of other materials such as aluminum. You should be able to find them in large DIY stores. Check this out:
it's a simple steel pipe with an outer diameter of 10mm and an inner diameter of 8mm. It can be made of other materials such as aluminum. You should be able to find them in large DIY stores. Check this out: