Page 1 of 1

Problem and very confused with plans

Posted: Mon Jun 15, 2015 11:57 am
by Lc1975
Hello..
Bought your plans to try to make the Saw Router table..
I have a cnc to make some things.. Use Aspire Vectric..
But when i try to open the dwg files get nothing.... only a few lines most of the files... Really nothing...

You have information that it can be used to make in a cnc.. can you tell me what program you use to open those files?

Regards

Problem and very confused with plans

Posted: Mon Jun 15, 2015 2:09 pm
by Suso
wrote:Hello..
Bought your plans to try to make the Saw Router table..
I have a cnc to make some things.. Use Aspire Vectric..
But when i try to open the dwg files get nothing.... only a few lines most of the files... Really nothing...

You have information that it can be used to make in a cnc.. can you tell me what program you use to open those files?

Regards



-Hello Felipe, i use Autocad to design, Artcam and Mach3 to cnc...your problem is because the files are a solid 3D model, try this:
-Open the Dwg file in autocad, positioning the view and the layers you need, then under command _xedges you get the edges, save as a new DXF file and try again, CAM programs use DXF files... let me know if you're still having problems or if it works.

Problem and very confused with plans

Posted: Mon Jun 15, 2015 9:48 pm
by Lc1975
Sorry but it's confused to me..

Can get help please?

Problem and very confused with plans

Posted: Tue Jun 16, 2015 10:01 am
by Suso
wrote:Sorry but it's confused to me..

Can get help please?


In a few minutes I send you some Dxf files...

Problem and very confused with plans

Posted: Tue Jun 16, 2015 11:16 am
by Suso
-Go to your email and download the product again, you find a new folder with some dxf files...

Problem and very confused with plans

Posted: Tue Jun 16, 2015 12:02 pm
by Lc1975
Thanks for the help.

And sorry for the work..

Thank you!

:)