Hello..
Bought your plans to try to make the Saw Router table..
I have a cnc to make some things.. Use Aspire Vectric..
But when i try to open the dwg files get nothing.... only a few lines most of the files... Really nothing...
You have information that it can be used to make in a cnc.. can you tell me what program you use to open those files?
Regards
Problem and very confused with plans
-
- Posts: 2268
- Joined: Thu Oct 22, 2015 4:51 pm
Problem and very confused with plans
wrote:Hello..
Bought your plans to try to make the Saw Router table..
I have a cnc to make some things.. Use Aspire Vectric..
But when i try to open the dwg files get nothing.... only a few lines most of the files... Really nothing...
You have information that it can be used to make in a cnc.. can you tell me what program you use to open those files?
Regards
-Hello Felipe, i use Autocad to design, Artcam and Mach3 to cnc...your problem is because the files are a solid 3D model, try this:
-Open the Dwg file in autocad, positioning the view and the layers you need, then under command _xedges you get the edges, save as a new DXF file and try again, CAM programs use DXF files... let me know if you're still having problems or if it works.
-
- Posts: 3
- Joined: Mon Jun 15, 2015 12:07 pm
Problem and very confused with plans
Sorry but it's confused to me..
Can get help please?
Can get help please?
-
- Posts: 2268
- Joined: Thu Oct 22, 2015 4:51 pm
Problem and very confused with plans
wrote:Sorry but it's confused to me..
Can get help please?
In a few minutes I send you some Dxf files...
-
- Posts: 2268
- Joined: Thu Oct 22, 2015 4:51 pm
Problem and very confused with plans
-Go to your email and download the product again, you find a new folder with some dxf files...
-
- Posts: 3
- Joined: Mon Jun 15, 2015 12:07 pm
Problem and very confused with plans
Thanks for the help.
And sorry for the work..
Thank you!
:)
And sorry for the work..
Thank you!
:)