Multi-Function Workbench by David Brenner

Share your woodworking projects!
Post Reply
Suso
Posts: 1074
Joined: Thu Oct 22, 2015 4:51 pm

Multi-Function Workbench by David Brenner

Post by Suso » Mon Aug 05, 2019 3:03 pm

nice workbench and benchtop made by David Brenner, he wrote me:

Love this bench! Midway through building it. Just installed a top that I made out of white oak from a local sawmill:

Image

Image

blackjack12982
Posts: 1
Joined: Thu Jan 23, 2020 3:50 am

Re: Multi-Function Workbench by David Brenner

Post by blackjack12982 » Thu Jan 23, 2020 3:51 am

Just a rough guess, but how many sheets of plywood did you get to build this MFT, this table is by far the best I've seen. Thanks!

Suso
Posts: 1074
Joined: Thu Oct 22, 2015 4:51 pm

Re: Multi-Function Workbench by David Brenner

Post by Suso » Thu Jan 23, 2020 5:39 pm

hello mate,
for the original design, with drawers etc...

aprox:
1 x 18mm thick hard plywood
4 x 18mm thick soft plywood
1 x 9mm thick soft plywood
one more sheet of the material you choose for the lid

Tanker_5455
Posts: 11
Joined: Tue Dec 31, 2019 6:44 pm

Re: Multi-Function Workbench by David Brenner

Post by Tanker_5455 » Fri Jan 24, 2020 3:44 pm

Looking good, are the plans for it already available or is it still a WIP?

Suso
Posts: 1074
Joined: Thu Oct 22, 2015 4:51 pm

Re: Multi-Function Workbench by David Brenner

Post by Suso » Fri Jan 24, 2020 4:32 pm

you'll find the plans here in my shop:

Tanker_5455
Posts: 11
Joined: Tue Dec 31, 2019 6:44 pm

Re: Multi-Function Workbench by David Brenner

Post by Tanker_5455 » Sat Jan 25, 2020 5:45 am

Awesome, thanks!

Post Reply