I really got inspired by your workbench on YouTube. So I bought a set of plans and used those as an inspiration for my own take on the workbench. I have a very small workshop and the original design does not fit into that space. So I made my own version with two smaller workbenches.
I would like to share some pictures of them here. They are made of 12 mm cheap plywood, so I had to recalculate the measurements a great deal. Made a small 12 mm mistake on the first one I made. Corrected this for the second one. Some of the plywood had a bend, so one of the drawer fronts is protruding a little. But it does not matter that much. It still works fine.
I used an ash kitchen countertop as the bench top and my bench dog holes are 22 mm because that is readily available as stock at the local hardware and wood store. Most of my handtools are in the drawers. I plan to make some brackets and add some magnets, to the back space of that same unit, to attack my Japanese hand saws. And I plan to add a pliers attachment to the space at one end of that unit. I am using MicroJig clamps to attach anything to the bench. And I use a simple system and shooting board when using my planes. I have no need for an end vise. But here you have it:
Share your woodworking projects!
2 posts • Page 1 of 1