Modular Workbench & Mobile Tool Stand

Discuss topics related to the Multi-Function Workbench
Post Reply
Suso
Posts: 1070
Joined: Thu Oct 22, 2015 4:51 pm

Modular Workbench & Mobile Tool Stand

Post by Suso » Wed Feb 12, 2020 3:45 pm

This is my latest project, a modular workbench with great storage capacity that can also be used as a mobile tool stand. It's built using the same system as the Multi-Function Workbench I made few weeks ago, but this one is smaller, about 1m long and 60cm deep.

Rather than making it by cutting away, we'll be joining parts together.

Image

Making a modular bench was my first idea when I built the Multi-Function Workbench, and since some of you have requested plans for a similar but smaller bench that can be adapted for use in workshops with limited space, I've decided to go ahead and make one.

Since it's modular, you can try different combinations. You can make just one, two that are separate or joined, three or even four. For now I'll build two, though later I might make more.

Image

Suso
Posts: 1070
Joined: Thu Oct 22, 2015 4:51 pm

Re: Modular Workbench & Mobile Tool Stand

Post by Suso » Wed Feb 12, 2020 3:57 pm

Today I've glued all the pieces that make up each part of the frames using a nail gun and clams, and here is a frame together!




Then I cut the cabinets of the workbench. I've also cut the grooves that will act as slides for the drawers. Now I can glue the cabinets and frames together.


Suso
Posts: 1070
Joined: Thu Oct 22, 2015 4:51 pm

Re: Modular Workbench & Mobile Tool Stand

Post by Suso » Thu Feb 13, 2020 2:36 pm

Finally I'm gluing the cabinets and the frames together. I've used wood glue but I think that screws could work too...


Suso
Posts: 1070
Joined: Thu Oct 22, 2015 4:51 pm

Re: Modular Workbench & Mobile Tool Stand

Post by Suso » Mon Feb 17, 2020 2:50 pm

Making the modular workbench joining system. In the second photo you'll see one of the pieces to join the modules. That piece will be hidden inside the modules. I'll use threaded inserts and bolts.


Post Reply