3D Router, when a CNC machine is overkill.

Discuss topics related to the 3D Router
Suso
Posts: 982
Joined: Thu Oct 22, 2015 4:51 pm

3D Router, when a CNC machine is overkill.

Post by Suso » Fri Oct 23, 2015 2:32 pm

wrote:Hi

Thinking of buying the plans, but before, could you let us know
The additional parts list
The amount of plywood, thickness, needed

Thanks


What You'll Need:

Woodworking tools
A sheet of 18mm thikness plywood (2440x1220mm)
32 ball bearings (608)
5 Lineal meters L perfil of steel (1mm thikness)
500mm steel piper, 10mm exterior diameter and 8mm inner
A lot of M8 and M6mm metric screw
A lot of M8 and M6mm Washers
A lot of wood screw
Number 23 Metal spring 140 x 22mm

Al
Posts: 6
Joined: Tue Oct 06, 2015 8:22 pm

3D Router, when a CNC machine is overkill.

Post by Al » Sun Dec 27, 2015 2:15 am

wrote:New 3D Router video is comming! has many examples of methods of work with 3d router, also a new Z axis lock, you will be very useful!

Image


In the photo of this post, what is the EASIEST method of getting the workpiece and the template lined up?
I've just tried to do a neck pocket on a piece of scrap, and didn't know the best way to align them so that its as accurate as I need it to be. Especially for a neck pocket! :P

[email protected]
Posts: 43
Joined: Thu Oct 15, 2015 5:35 pm

3D Router, when a CNC machine is overkill.

Post by [email protected] » Mon Dec 28, 2015 8:34 am

Hi Al,

watch out this 3 videos, I think it's what you're looking for:

https://www.youtube.com/watch?v=b-RwzXqxwMs&list=PL-zsYqBu58Gp4fwXI1l2SZzmNY5SOVENq

The top of the table is 70x70cm so I used 2x10mm thickness MDF boards (70x35cm) and I placed booth the guitar and the template in the middle of these boards

Regards,
Suso

Al
Posts: 6
Joined: Tue Oct 06, 2015 8:22 pm

3D Router, when a CNC machine is overkill.

Post by Al » Mon Dec 28, 2015 8:45 am

Perfect! Thanks. I watched these videos a couple of hours after posting! But thanks anyway. Ingenious idea!

Bart De Worm
Posts: 6
Joined: Fri Feb 26, 2016 3:33 pm

3D Router, when a CNC machine is overkill.

Post by Bart De Worm » Mon Feb 29, 2016 9:23 am

Hey! Last Friday I bought the plans, I am very excited to build it but i have already a question:
Can you give a little bit more information about the "32 ball bearings (608)"?
Which diameter are these bearings? 8X22X7?

http://www.alibaba.com/product-detail/Good-quality-deep-groove-ball-bearing_60345489872.html?spm=a2700.7724838.30.17.l6dYBb&s=p

EDIT: I found it already in the 'Fasteners list.pdf' file you send me after accepting my payment!
Thx a lot!

Thank you very much!
Bart

Suso
Posts: 982
Joined: Thu Oct 22, 2015 4:51 pm

3D Router, when a CNC machine is overkill.

Post by Suso » Mon Feb 29, 2016 2:14 pm

Yep, those are the ones. But if you can spend a bit more and get a better quality, do it.
Where to find bearings

You can also take a look to these post of fellows of the forum that are exploring different ways:

Dorel's router

Nello's

DonaldErnest
Posts: 1
Joined: Mon Mar 05, 2018 10:21 am

Re: 3D Router, when a CNC machine is overkill.

Post by DonaldErnest » Mon Mar 05, 2018 12:07 pm

I am extremely inspired by this CNC machine and purchased the plans the upcoming week. it can extra be utilized for other woodwork function. I have attempted to make an outline which can be effortlessly worked, with rather basic and low price.

SteveT
Posts: 2
Joined: Thu Jun 13, 2019 9:40 pm

Re: 3D Router, when a CNC machine is overkill.

Post by SteveT » Thu Jun 13, 2019 9:47 pm

This is a fabulous machine and Kudos for the idea.

I am thinking of using this to do the tops for some Les paul style guitars to get the top body contours is the bed big enough or do I need to expand it a bit. I have a scrap LP body I was going to use as the template and do like you did in the video of the F hole. It would be so much easier than routering around a bunch of templates and then blending it. I am not worried about pick cavities or neck pocket etc. the the top contour

Suso
Posts: 982
Joined: Thu Oct 22, 2015 4:51 pm

Re: 3D Router, when a CNC machine is overkill.

Post by Suso » Fri Jun 14, 2019 8:08 am

hello Steve,
check this out:

SteveT
Posts: 2
Joined: Thu Jun 13, 2019 9:40 pm

Re: 3D Router, when a CNC machine is overkill.

Post by SteveT » Sat Jun 22, 2019 2:02 pm

yea i missed that first time around amazing idea I am in the process of cutting all the pieces. the mm to inches is killing me but rounding the numbers is working out so far.

Post Reply