Page 1 of 1
Diy Blast Gate Box for the Workbench
Posted: Wed Sep 29, 2021 12:50 pm
by Suso
This is the
blast gate box that I'll be using with my new mobile workbench. The box has a main 100mm dust hose and two secondary 63mm hoses connected to a blast gate, one for the table saw and another that goes straight to the router table cabinet:
Re: Diy Blast Gate Box for the Workbench
Posted: Thu Sep 30, 2021 1:19 pm
by Suso
I've almost finished the blast gate box. I still need to screw the gates and place the box in the workbench.
Re: Diy Blast Gate Box for the Workbench
Posted: Fri Oct 01, 2021 1:32 pm
by Suso
Just posted on Youtube the
fourth video in a five-part series where I'll show you how to build the blast gate box that I'll be using with my new mobile workbench.
Re: Diy Blast Gate Box for the Workbench
Posted: Thu Oct 07, 2021 3:11 pm
by Suso
Short video to show you the homemade
blast gate box for my new mobile workbenh. I’m going to run a few tests to see how well it works.